Best MARUIEEB Keyboard Plates: 5 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
MARUIEEB does not sell complete keyboards: it sells positioning plates and other parts for people building or modding their own. Our top pick is the 65% polycarbonate plate, because it fits the most common 67/68-key kits (Tada68, KBD65, DZ65 style) and gives a softer, quieter feel than metal. The 64-key PC plate is the cheapest, and the 61-key brass plate is the pick for a firm, loud bottom-out. Every plate here is sold alone and supports PCB-mount stabilizers only. We compared MARUIEEB's listings and published specs; nothing was tested by hand.
Our top pick: MARUIEEB 65% Polycarbonate Plate.
Quick picks
Our 5 picks
MARUIEEB 65% Polycarbonate Plate
Best for: 65% DIY builds
- Form Factor
- 65%
- Backlighting
- RGB
- Dimensions
- 12.2 × 3.74 × 0.1 inches
View on Amazon: MARUIEEB 65% Polycarbonate Plate Affiliate link
The MARUIEEB 65% polycarbonate plate fits most 67/68-key boards (the listing names Tada68, KBD65, DZ65 and TOFU65 style builds). It is a CNC-cut, single-side frosted PC sheet that the listing describes as quiet, and it takes PCB-mount stabilizers only. You get the plate alone: no case, PCB, switches or keycaps.
Pros
- Fits common 67/68-key 65% kits
- Frosted PC lets RGB glow through
- Softer flex than brass or aluminum
Cons
- PCB-mount stabilizers only
- No thickness figure given
Good fit if
- You are rebuilding a 65% board
- You want a softer, quieter typing feel
Skip if
- Your board uses plate-mount stabilizers
- You want a stiff, loud plate
Verdict: The MARUIEEB plate most 65% builders should look at first.
MARUIEEB 60% PC Positioning Plate
Best for: Budget 64-key builds
- Form Factor
- 60%
- Dimensions
- 11.2 × 3.74 × 0.06 inches
View on Amazon: MARUIEEB 60% PC Positioning Plate Affiliate link
MARUIEEB's 64-key polycarbonate plate is cut for 60%-size boards with a 2U left Shift and supports some split-key layouts. The listing calls the feel soft and the sound slightly muffled with low resonance; the sheet is translucent with a single frosted side. It is the lowest-priced plate in this group.
Pros
- Cheapest MARUIEEB plate here
- Cut for 64-key, 2U left Shift layouts
- Muffled sound per the listing
Cons
- Only fits 64-key PCBs
- PCB-mount stabilizers only
Good fit if
- Your 60%-size PCB has 64 keys and a 2U left Shift
- You want a quiet plate on a budget
Skip if
- Your PCB has 61 keys
- You need plate-mount stabilizers
Verdict: A low-cost PC plate for 64-key builds.
MARUIEEB 60% Brass CNC Plate
Best for: Firm-feel 60% builds
- Form Factor
- 60%
- Dimensions
- 11.2 × 3.74 × 0.06 inches
View on Amazon: MARUIEEB 60% Brass CNC Plate Affiliate link
The MARUIEEB 61-key brass plate is for 60% boards with a 2.25U left Shift and supports Minila, ANSI and ISO layouts according to the listing. It is opaque gold-brushed brass that MARUIEEB describes as solid with direct bottom-out feedback and a loud, low-frequency "thock" sound.
Pros
- Stiff, direct bottom-out feel
- Deeper, louder sound profile
- ANSI and ISO support listed
Cons
- Opaque: blocks under-key light
- Costs about twice the PC plates
Good fit if
- You want a firm, heavy-sounding 60%
- Your 61-key PCB uses a 2.25U left Shift
Skip if
- You want a soft, flexy feel
- You want RGB to shine through the plate
Verdict: The stiff option for 61-key builds.
60% 61 PC Plate 2.25U Left Shift Mechanical Keyboard Positioning Plate | 61Key Polycarbonate positioning plate , Support Minila ANSI ISO Layout,DIY Mechanical Keyboard Accessories
Best for: Quiet 60% builds
- Form Factor
- 60%
- Dimensions
- 11.2 × 3.74 × 0.06 inches
The 61-key polycarbonate plate is the soft counterpart to the brass 61-key plate: same 2.25U left Shift cut with Minila, ANSI and ISO support, but in single-side frosted, translucent PC with a muffled, low-resonance sound per the listing. Its offer data is older than two weeks, so check the price on the product page.
Pros
- Soft feel for 61-key boards
- Translucent for RGB
- ANSI and ISO support listed
Cons
- PCB-mount stabilizers only
- Offer data not recently refreshed
Good fit if
- You want a quieter 61-key build
- You like a little flex
Skip if
- You want a stiff plate
- Your PCB has 64 keys
Verdict: The soft choice for 61-key PCBs.
MARUIEEB DIY 67 68 Key Mechanical Keyboard Brass Positioning Plate | Compatible with Tada68, KBD65, DZ65, RGB Backlit, 67 68 Key Layout
Best for: Stiff 65% builds
- Backlighting
- RGB
- Dimensions
- 12.2 × 3.74 × 0.06 inches
MARUIEEB also cuts its 67/68-key 65% plate in brass. The listing says it fits most 67/68-key boards (Tada68, KBD65, DZ65 style) and supports PCB-mount stabilizers only, but gives fewer sound and feel details than the 61-key brass plate. Its offer data is older than two weeks, so check the price before buying.
Pros
- Brass option for 65% kits
- Same fit list as the PC 65% plate
- CNC machined
Cons
- Little detail on feel and sound
- Most expensive plate here
Good fit if
- You want a stiffer 65% build
- You already know you like brass
Skip if
- You want a soft, quiet board
- You want RGB to show through
Verdict: The firm-feel plate for 65% builds.
Specifications side by side
| Spec | MARUIEEB 65% Polycarbonate Plate | MARUIEEB 60% PC Positioning Plate | MARUIEEB 60% Brass CNC Plate | 60% 61 PC Plate 2.25U Left Shift Mechanical Keyboard Positioning Plate | 61Key Polycarbonate positioning plate , Support Minila ANSI ISO Layout,DIY Mechanical Keyboard Accessories | MARUIEEB DIY 67 68 Key Mechanical Keyboard Brass Positioning Plate | Compatible with Tada68, KBD65, DZ65, RGB Backlit, 67 68 Key Layout |
|---|---|---|---|---|---|
| Form Factor | 65% | 60% | 60% | not stated | not stated |
| Backlighting | RGB | not stated | not stated | not stated | RGB |
| Dimensions | 12.2 × 3.74 × 0.1 inches | 11.2 × 3.74 × 0.06 inches | 11.2 × 3.74 × 0.06 inches | 11.2 × 3.74 × 0.06 inches | 12.2 × 3.74 × 0.06 inches |
| Size | 65% Mechanical Keyboard, 67/68 Keys | not stated | not stated | not stated | not stated |
| Color | Transparent PC Plate | 2U Shift Left | not stated | 2.25U Left Shift | Yellow |
| Model | not stated | not stated | 2.25U Left Shift | not stated | not stated |
The MARUIEEB plate lineup
65% PC plate: 67/68 keys, single-side frosted polycarbonate, fits Tada68/KBD65/DZ65-style kits.
65% brass plate: same 67/68-key cut in brass.
64-key PC plate: 60% size with a 2U left Shift, translucent frosted PC, some split-key layouts.
61-key PC plate: 2.25U left Shift, Minila/ANSI/ISO support, translucent frosted PC.
61-key brass plate: same 61-key cut in gold-brushed brass, opaque, stiff and loud.
All are CNC machined, sold without a keyboard and take PCB-mount stabilizers only.
Where MARUIEEB fits
MARUIEEB is a parts brand for builders who already own a case and PCB. Its plates come in the two most common materials, polycarbonate for a soft, quiet board and brass for a firm, deep-sounding one, in three common cuts. Listings give no plate thickness or weight, and none supports plate-mount stabilizers. Choose a PC plate if you want flex and visible RGB; choose brass if you want a stiff bottom-out and a louder sound.
Choosing a MARUIEEB plate
-
Count your PCB's keys
MARUIEEB cuts plates for 61-key and 64-key 60% PCBs and for 67/68-key 65% PCBs. A 61-key plate will not fit a 64-key PCB.
-
Check the left Shift
The 61-key plates use a 2.25U left Shift; the 64-key plate uses a 2U left Shift. Match your PCB and keycap set.
-
Pick the material
Polycarbonate flexes more and sounds muffled; brass is stiff and louder with a lower pitch.
-
Stabilizers
All five plates support PCB-mount stabilizers only, so plate-mount stabilizers will not work.
-
Lighting
The PC plates are translucent and let RGB through; brass is opaque.
Frequently asked questions
Does MARUIEEB sell complete mechanical keyboards?
Not in the listings we checked: MARUIEEB sells plates, foam, dust covers, wrist rests and a wood case for DIY builds.
Which MARUIEEB plate fits a Tada68 or KBD65?
The 67/68-key 65% plate, sold in polycarbonate and in brass.
Is the MARUIEEB brass plate louder than the PC plate?
Yes. MARUIEEB describes its 61-key brass plate as loud with a low-frequency thock, and its PC plates as muffled with low resonance.
Can I use plate-mount stabilizers with MARUIEEB plates?
No. Each MARUIEEB plate listing says it supports PCB stabilizer installation only.
Which MARUIEEB plate is the cheapest?
The 64-key polycarbonate plate with a 2U left Shift.




