EPOMAKER Split70 Review (2026): Wireless Split Ergonomic Keyboard With QMK/VIA and a Knob
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The EPOMAKER Split70 (White) is a split mechanical keyboard in a 70% layout: two halves you can spread apart for a natural shoulder and wrist posture, or link with a cable. Top reason to pick it: it is one of the few wireless split boards that also gives QMK/VIA remapping, a rotary knob, 3/5-pin hot-swap and a gasket mount, with Mac modifier keycaps in the box. It ships with factory-lubed Wisteria Linear V2 switches and pairs with up to five devices over Bluetooth 5.0, 2.4GHz or USB-C. We wrote these Split70 notes from EPOMAKER's listing and published specs, without hands-on testing.
What stands out
- Split70: two-piece 70% split layout
- QMK/VIA remapping with a JSON file
- Rotary knob for volume, brightness, media
- Split70: 3/5-pin hot-swap, Wisteria Linear V2
- BT 5.0, 2.4GHz and USB-C; Mac modifier caps included
Who it fits
Good fit for
Typists with wrist or shoulder strain who want to try a split layout without giving up wireless, hot-swap or VIA remapping.
Who should skip it
Anyone who needs a number pad or a function row next to a numpad, and people who do not want to relearn where the split falls.
Verdict: A well-equipped entry into wireless split keyboards; the 3000mAh battery is modest for an RGB board.
EPOMAKER Split70 specs explained
Split70 layout
70% split in two halves; joined by cable or set apart.
Split70 switches
Wisteria Linear V2, factory lubed; 3-pin and 5-pin hot-swap.
Split70 software
QMK/VIA with a custom JSON file; remaps and macros.
Split70 connection
Bluetooth 5.0, 2.4GHz, USB-C; up to 5 devices; 1000Hz on 2.4GHz and cable.
Split70 battery
3000mAh; no hour rating listed.
Split70 build
Gasket mount, five padding layers, 71 south-facing RGB LEDs, PBT caps.
EPOMAKER Split70 build
Each Split70 half rests on a gasket mount with sandwiched latex, an IXPE switch pad, a PET pad, bottom sponge and bottom silicone, aimed at a quiet, creamy sound. The keycaps are PBT, and Mac modifier caps come in the box. A rotary knob sits on the board for volume, brightness or media. The listing size of 14.7 x 4.65 in likely describes the two halves joined; split apart, the board takes as much width as you give it.
Using the EPOMAKER Split70
A split board lets your hands sit at shoulder width, which can ease wrist bending; expect a few days to adjust, especially for keys near the split such as B, 6 and Y. VIA loads with a JSON file and shows changes in real time. The board holds five paired devices, so switching between a PC, Mac and tablet needs no re-pairing. Choose the Split70 if you want a split layout with wireless and hot-swap; choose a one-piece 75% board like the EPOMAKER x Aula EA75 MAX if you want a screen and a bigger battery.
EPOMAKER Split70: before you buy
Check these points first:
Check before you buy
- The Split70 needs a JSON file to load in VIA
- The Split70 battery is 3000mAh with no hour rating
- No number pad on the Split70
- Plan desk room for two Split70 halves
The product at a glance
EPOMAKER Split70 Ergonomic Gasket Keyboard
Best for: Ergonomic home and office desks
- Switch Type
- Wisteria Linear V2
- Form Factor
- 70%
- Connectivity
- Bluetooth 5.0, 2.4GHz, USB-C
- Backlighting
- RGB
- Keycap Material
- PBT
- Hot-Swap Support
- Hot-Swappable
View on Amazon: EPOMAKER Split70 Ergonomic Gasket Keyboard Affiliate link
EPOMAKER Split70, White: 70% split ergonomic keyboard with tri-mode wireless, QMK/VIA, a knob, 3/5-pin hot-swap, lubed linears and PBT caps.
Pros
- True split layout with wireless
- QMK/VIA remapping
- 3/5-pin hot-swap
- Mac modifier caps included
Cons
- 3000mAh battery, no runtime listed
- No number pad
- Split layout takes time to learn
Good fit if
- You want to ease wrist strain
- You remap keys with VIA
Skip if
- You need a numpad
- You want a one-piece board
Verdict: A wireless split board with VIA and hot-swap.
Specifications side by side
| Spec | EPOMAKER Split70 Ergonomic Gasket Keyboard |
|---|---|
| Switch Type | Wisteria Linear V2 |
| Form Factor | 70% |
| Connectivity | Bluetooth 5.0, 2.4GHz, USB-C |
| Backlighting | RGB |
| Keycap Material | PBT |
| Hot-Swap Support | Hot-Swappable |
| Mounting Style | Gasket Mount |
| Media Controls | Volume Knob |
| Use | Gaming |
| Design | Ergonomic |
| Color | White |
| Operating System | Mac |
| Dimensions | 14.7 × 4.65 × 1.56 inches |
| Model | Split70 |
Frequently asked questions
Can the Split70 halves be used apart?
Yes. The Split70 halves can sit apart for a wider posture or be linked by cable.
Does the EPOMAKER Split70 support VIA?
Yes. The Split70 supports QMK/VIA using a custom JSON file.
What switches does the Split70 use?
Factory-lubed Wisteria Linear V2; the Split70 sockets accept any 3-pin or 5-pin switch.
Does the Split70 work with a Mac?
Yes. The Split70 pairs with Mac, Windows and Android and includes Mac modifier keycaps.
How many devices can the Split70 connect to?
Up to five paired devices across Bluetooth 5.0, 2.4GHz and USB-C.
Featured in
See also
- corbobo aula win60 he gradient pink review
- corbobo lingbao k98 pro wireless review
- iroboosta 400pro 75 wireless keyboard review
- epomaker x aula f75 gasket mechanical keyboard review
- epomaker th108 pro full size mechanical keyboard review
- EPOMAKER TH99 PRO Review: Quiet 96% Wireless Keyboard With Screen
- EPOMAKER Galaxy100 Review: Aluminum QMK/VIA Wireless Keyboard
- EPOMAKER x Aula F75 MAX Review: 75% Keyboard With TFT Screen
- best wireless gaming keyboards
- btootos wireless earbuds review
