As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Lizard Skins DSP Mouse Grip Review: 0.5mm Cut-to-Fit Polymer Sheet (Tangerine)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Lizard Skins DSP Mouse Grip is an accessory, not a mouse: a thin textured sheet that you cut to the shape of your mouse sides or buttons to add grip. This one is the Tangerine color (model DSPMG181), one of 10 colors in the listing. Top reason to pick it: it is not tied to one mouse model. The 4 x 6 inch (10 x 15 cm) sheet comes with a grid transfer sheet, so you trace the shape you need and cut it yourself, which suits any shell that has no pre-cut kit. The material is Lizard Skins' DSP Durasoft Polymer at 0.5mm thick, sold as slip-resistant. This review is based on the Lizard Skins listing, not hands-on testing.

What stands out

  • DSPMG181 sheet: 4 x 6 in (10 x 15 cm)
  • 0.5mm DSP Durasoft Polymer per the Lizard Skins title
  • Grid transfer sheet for tracing the Lizard Skins cut
  • Works on any mouse shape you can trace
  • Tangerine, one of 10 Lizard Skins colors

Who it fits

Good fit for

Players whose mouse has no pre-cut grip kit, or who want a bright orange accent and a softer, tackier surface on the sides.

Who should skip it

Anyone who wants a ready-cut kit for one mouse model, or who does not want to cut and trace by hand.

Verdict: A flexible, cut-it-yourself grip sheet for almost any mouse; plan the cut with the grid sheet before trimming.

Lizard Skins DSP Mouse Grip details explained

Sheet size

4 x 6 in (10 x 15 cm); width 3.94 in and length 5.91 in for the DSPMG181.

Thickness

0.5mm, stated in the Lizard Skins title.

Material

DSP Durasoft Polymer, described as slip-resistant and soft.

Fit

Cut to fit: trace with the included grid transfer sheet, then trim.

Color

Tangerine; the Lizard Skins listing offers 10 colors.

Adhesive

The DSPMG181 feature text does not describe the backing or adhesive.

Lizard Skins DSP sheet and finish

The DSPMG181 is a flat orange sheet with a textured top, thin enough at 0.5mm that it should not change how a mouse fits the hand much. Lizard Skins calls the material DSP Durasoft Polymer and compares its feel favourably with synthetic rubber; the listing gives no further figures such as hardness. Because it is one plain sheet rather than shaped pieces, it can cover side panels, main buttons or a thumb rest, as long as the area fits within 4 x 6 inches.

Cutting and fitting the Lizard Skins grip

Clean the mouse, lay the grid transfer sheet over the area you want to cover and trace it, then move the outline to the grip sheet and cut. Small, simple pieces are easier to get flush than one large wrap around a curved shell. The listing never says how the sheet attaches, so check the photos or packaging for the backing before relying on it. Choose this Lizard Skins sheet if your mouse has no pre-cut kit; choose a model-specific tape such as HOTLINEGAMES Grip Upgrade 2.0 Plus if you own a mouse it is cut for and want no trimming.

Lizard Skins DSP Mouse Grip: before you buy

Check these first:

Check before you buy

  • Each DSPMG181 sheet covers at most 4 x 6 inches
  • You need scissors or a craft knife to cut the Lizard Skins sheet
  • The Lizard Skins text does not describe the adhesive
  • Tangerine is a bright orange; 10 other colors exist

The product at a glance

Lizard Skins DSP Mouse Grip Tangerine

Best for: Universal cut-to-fit grip

Use
Gaming
Length
5.91 inches
Width
3.94 inches

View on Amazon: Lizard Skins DSP Mouse Grip Tangerine Affiliate link

Lizard Skins DSP Mouse Grip (Tangerine, DSPMG181): a 0.5mm Durasoft Polymer sheet of 4 x 6 inches with a grid transfer sheet, cut by hand to fit any gaming or office mouse.

Pros

  • Fits any mouse you can trace
  • Thin 0.5mm polymer
  • 10 colors to choose from

Cons

  • You must cut it yourself
  • Adhesive not described
  • One sheet of 4 x 6 inches

Good fit if

  • Your mouse has no pre-cut kit
  • You want an orange accent

Skip if

  • You want a pre-cut kit
  • You dislike trimming by hand

Verdict: A universal trace-and-cut grip sheet for any mouse.

Specifications side by side

Spec Lizard Skins DSP Mouse Grip Tangerine
Use Gaming
Length 5.91 inches
Width 3.94 inches
Size 4 x 6 (10 cm x 15 cm)
Color Tangerine
Model DSPMG181

Frequently asked questions

What mice does the Lizard Skins DSP grip fit?

Any mouse whose grip areas fit within the 4 x 6 inch DSPMG181 sheet, since you trace and cut it yourself.

How thick is the Lizard Skins DSP Mouse Grip?

The listing title gives 0.5mm.

What is the Lizard Skins grip made of?

DSP Durasoft Polymer, a soft, slip-resistant material according to Lizard Skins.

Is the Lizard Skins DSP grip pre-cut?

No. It is a single sheet with a grid transfer sheet for tracing your own shape.

Does the Lizard Skins DSPMG181 sheet have adhesive?

The feature text does not say; check the product photos or packaging.

See also